Jas Enterprise

MANUFACTURER-PUBLISHED PRODUCT REFERENCES

Product families and process scope

Official product pages reviewed on 2026-11-02. These are selected documented offerings, not an exhaustive current catalogue or independently tested performance.

Connect this supplier to a processing route

• Sunflower — The domestic and mini commercial product pages explicitly list sunflower. Match the selected model to preparation and actual operating requirements.
• Groundnut / peanut — The domestic and mini commercial product pages explicitly list peanut / groundnut. Confirm kernel preparation and oil clarification.
• Soybean — Soybean is explicitly listed on the domestic and mini commercial pages; request a model-specific preparation and pressing proposal.
• Rapeseed / canola — Mechanical pressing-stage reference only. The selected pages name mustard, which is not taken as proof of a rapeseed / canola setup.

What to confirm in a quotation

Choose the domestic, mini commercial or commercial model and provide the actual seed and required operating duty. Confirm heating, measured oil temperature, cleaning, clarification and acceptance conditions. Cold-press marketing terminology is not a measured oil-temperature guarantee.

Confirm current availability, configuration, local requirements, supply boundary and acceptance conditions directly with the supplier. Source review does not change this listing into a certification or endorsement.

MODEL · TRIAL · PROJECT EVIDENCE

Current catalogue, configuration trials and acceptance evidence

Reviewed 2026-11-03. Official model/configuration listings and storefront snapshots reviewed; service offers, general company statements and training remain separate from measured trials or signed acceptance. Current website listing is not stock or delivery confirmation. Trial services and historical project accounts do not establish acceptance of your proposed line.

Models and configurations currently described

JAS-OMM-400 domestic screw press

The home-use table identifies JAS-OMM-400 and separately lists power and motor-power figures plus a material-dependent operating range. Confirm the exact nameplate, heating/drive loads, permissible duty cycle and seed preparation. The domestic designation does not establish commercial continuous duty, measured recovery or a guaranteed cold-press oil temperature.

Official website directly retrieved and reviewed 2026-11-03; listing, present supply and project-specific configuration require separate confirmation.

Official sources: Mini Oil Maker Machine - Domestic Oil Extraction Machine manufacturer, supplier, exporter Jas Enterprise

JAS-OMM-1400 mini commercial screw press

The mini-commercial table identifies JAS-OMM-1400 with its own electrical, speed and duty entries. Keep these separate from the 400 and 2350 versions; confirm total load versus motor rating and actual-seed results. Unrelated petroleum/cleaning wording in the page is not adopted as edible-oil equipment scope.

Official website directly retrieved and reviewed 2026-11-03; listing, present supply and project-specific configuration require separate confirmation.

Official sources: Mini Oil Maker Machine - Domestic Oil Extraction Machine manufacturer, supplier, exporter Jas Enterprise

JAS-OMM-2350 commercial oil maker

The commercial table identifies JAS-OMM-2350 with different electrical, size and operating entries. Request a consistent current datasheet and installation/wiring information. References to used crude-oil generators, automobile or printing applications and broad purity/health claims are not adopted as facts about this edible-oil configuration. Catalogue output and continuous-hour claims are not measured acceptance results.

Official website directly retrieved and reviewed 2026-11-03; listing, present supply and project-specific configuration require separate confirmation.

Official sources: Mini Oil Maker Machine - Domestic Oil Extraction Machine manufacturer, supplier, exporter Jas Enterprise

Published trial support

Manufacturing checks and development trials: customer-trial scope unconfirmed

The mini-commercial page mentions checks after manufacture, while the company offer page mentions development trials and customer feedback. These do not define an accessible raw-seed pilot programme, test protocol or readable results for the offered model. Confirm whether a customer sample trial is available, including conditioning, settings, temperature measurements, oil/cake analyses, raw logs and the written report.

Official website directly retrieved and reviewed 2026-11-03; listing, present supply and project-specific configuration require separate confirmation.

Official sources: Mini Oil Maker Machine - Domestic Oil Extraction Machine manufacturer, supplier, exporter Jas Enterprise; Jas Enterprise, Manufacturer, Exporter of food processing machines Ahmedabad, Gujarat, India.

Project evidence and its limits

Company capability statements: named acceptance evidence gap

The selected company pages describe food-equipment manufacturing/customization and turnkey support, but a named, dated oilseed project tied to the offered model, readable signed FAT/SAT and measured acceptance data were not obtained. Template placeholder text, general customer counts and quality/standard claims are not used as project proof or current certificate verification. This is a gap in selected evidence, not proof that other records do not exist.

Official website directly retrieved and reviewed 2026-11-03; listing, present supply and project-specific configuration require separate confirmation.

Official sources: Food Processing Machinery Manufacturer & Exporter | Jas Enterprise; Jas Enterprise, Manufacturer, Exporter of food processing machines Ahmedabad, Gujarat, India.

Public acceptance evidence status

No complete readable signed customer FAT/SAT report or project acceptance dataset was obtained from these selected sources. The three model tables have separate duties; unrelated template wording and generic quality/development claims do not replace raw-seed test data or signed acceptance.

Documents and conditions to agree for your project

Editorial requests for a raw-material-specific offer and agreed testing; these are not a manufacturer-issued acceptance standard.

• Request the exact JAS-OMM code, current datasheet/nameplate, drive and heating loads, feed preparation, run/rest limits and filtration/cleaning scope.
• Confirm an actual-seed trial; agree moisture/conditioning, temperature measurement, settings, material balance, oil/cake analyses, raw logs and written scale-up limits.
• Obtain a customer-authorized comparable project, dated FAT/SAT criteria and measured results, deviations/closure and signed release. Keep manufacturing checks and generic development statements distinct from customer acceptance.

Read the preserved product-family and crop-scope references · Compare documented supplier scope