E-PAK Machinery

MANUFACTURER-PUBLISHED PRODUCT REFERENCES

Product families and process scope

Official product pages reviewed on 2026-11-01. These are selected documented offerings, not an exhaustive current catalogue or independently tested performance.

Connect this supplier to a processing route

• Sunflower — Finished-oil packaging stage only. Confirm oil viscosity and temperature, container, closure and food-contact requirements; seed extraction and refining are outside this reference.
• Groundnut / peanut — Finished-oil packaging stage only. Confirm oil viscosity and temperature, container, closure and food-contact requirements; seed extraction and refining are outside this reference.
• Soybean — Finished-oil packaging stage only. Confirm oil viscosity and temperature, container, closure and food-contact requirements; seed extraction and refining are outside this reference.
• Rapeseed / canola — Finished-oil packaging stage only. Confirm oil viscosity and temperature, container, closure and food-contact requirements; seed extraction and refining are outside this reference.

What to confirm in a quotation

Supply oil viscosity at operating temperature, bottle and cap samples, fill quantity, cleaning requirements and line layout. Request compatibility checks and agree integration with conveyors, cappers and labelers.

Confirm current availability, configuration, local requirements, supply boundary and acceptance conditions directly with the supplier. Source review does not change this listing into a certification or endorsement.

MODEL · TRIAL · PROJECT EVIDENCE

Current catalogue, configuration trials and acceptance evidence

Reviewed 2026-11-02. Finished-oil packaging evidence only; current model, sample-test and acceptance-process descriptions are separated from customer project reports. Current website listing is not stock or delivery confirmation. Trial services and historical project accounts do not establish acceptance of your proposed line.

Models and configurations currently described

Time-based metering pump / Tri-Filler configuration

The current pump overview lists time-based metering and tabletop pump fillers and describes Tri-Filler pump, pressure and gravity modes on a common frame. The edible-oil application page lists pump filling among its options. Obtain the quoted order/model code, pump/seals/nozzles and actual oil/container setup rather than treating the overview as a complete equipment schedule.

Current official website presentation reviewed 2026-11-02; model supply and project-specific oil/packaging suitability require confirmation.

Official sources: Pump Filling Machines | Pump Fillers for Liquids | E-PAK; Edible Oil Filling Machines | Cooking & Vegetable Oils

Gravity / pressure-gravity filler configuration

The current gravity-filler offering is a distinct filling principle. The edible-oil page includes gravity alongside other technologies; select from actual viscosity/temperature, container and fill requirements. A general liquid/application description is not a crop-specific fill-accuracy or production-speed guarantee.

Current official website presentation reviewed 2026-11-02; model supply and project-specific oil/packaging suitability require confirmation.

Official sources: Gravity Fillers – Gravity Filling Machines | E-PAK Machinery; Edible Oil Filling Machines | Cooking & Vegetable Oils

Published trial support

E-PAK product/container sample guidance: trial evidence gap

The September 30, 2026 engineering article says product/container samples and line drawings help recommend equipment, and discusses nozzle/contact-part, controls and integration choices. It does not supply an agreed sample-test protocol, a bookable test service or measured edible-oil trial results. Request the actual application test scope and report before treating the proposed configuration as validated.

Supplier selection/engineering article dated September 30, 2026; guidance is not a completed factory or site acceptance record.

Official sources: Custom-Engineered vs. Standard Filling Machines: When Each Makes Sense - E-PAK Machinery

Project evidence and its limits

Custom-engineering guidance: no named accepted oil project established

The same article describes standard versus custom system design and integration with other packaging machines. It is general selection guidance, not a named customer project, a signed FAT/SAT report or proof of installation acceptance for the proposed pump/gravity system. The selected sources do not establish that project-level evidence.

Current official website presentation reviewed 2026-11-02; model supply and project-specific oil/packaging suitability require confirmation.

Official sources: Custom-Engineered vs. Standard Filling Machines: When Each Makes Sense - E-PAK Machinery

Public acceptance evidence status

No complete readable signed customer FAT/SAT report or project acceptance dataset was obtained from these selected sources. A current application page and engineering article do not establish a tested or customer-accepted edible-oil installation.

Documents and conditions to agree for your project

Editorial requests for a finished-oil packaging offer and agreed tests; these are not a manufacturer-issued acceptance standard.

• Request the quoted pump/Tri-Filler or gravity configuration, oil/temperature, fill volume, container/closure and integration layout.
• Agree a written test using the intended oil and packaging, including measurements, accuracy/speed criteria, repeatability and changeovers; obtain the actual results.
• Request comparable customer-authorized references, project FAT/SAT protocols, deviations/closure, responsibilities and signed acceptance documentation.

Read the preserved product-family and crop-scope references · Compare documented supplier scope